Minolta DYNAX 5D Manuale di Servizio Scaricare il pdf (Pagina 50)

(2186) 21

REPAIR GUIDE

絞り減速ギヤ絞り減速ギヤ

絞り減速ギヤ

■■

■

Fig. 4Fig. 4

Fig. 4

““

“

””

”

““

“

””

”

““

“

””

”

““

“

””

”

■■

■

Fig. 5Fig. 5

Fig. 5

APERTURE ASSY Setting

Firstly confirm APERTURE ASSY is at the charge position (default position).

When the charge position was changed by APERTURE ASSY removal.

1. Reset Position Check

1-1. Confirm on which side (“a” or “b” in Fig. 5) in the square opening (of APERTURE ASSY) the

spring leg lies.

1-2. Turn the APERTURE REDUCTION GEAR in the direction opposite to the spring location (“a” or

“b” in Fig. 2) until the spring leg moves over to the other side.

e.g. IF the spring lies at “a” in Fig. 5, turn the gear toward “a” in Fig. 5.

1-3. With the above condition, turn the APERTURE REDUCTION GEAR slightly until its through hole

aligns with the through hole of the APERTURE BASEPLATE-A (Fig. 3).

2. Charge position setting.

2-1. Make sure that APERTURE ASSY is set to the reset position.

View from the front of APERTURE ASSY.

Turn APERTURE REDUCTION GEAR to clockwise direction 3 times until its through hole aligns

with the through hole of APERTURE BASEPLATE-A

APERTURE REDUCTION GEAR is set to charge position (default position). (Fig. 5)

APERTURE RING Removal/Installation

Removal

Turn APERTURE RING clockwise until it stops (Fig. 4). Now the ring can be removed.

Be careful not to turn the aperture coupling gear in APERTURE ASSY.

Installation

1. Set APERTURE ASSY to the charge completion position (default position) referring APERTURE ASSY

setting procedure as shown below, then install to FRONT FRAME ASSY.

APERTURE ASSY is at the charge completion position if it has never been removed, or the aperture

coupling gear has not been turned after removing APERTURE RING.

2. Install APERTURE RING so that the punch mark is positioned as illustrated. (Fig. 4)

APERTURE RINGAPERTURE RING

APERTURE RING

Punch markPunch mark

Punch mark

Spring legSpring leg

Spring leg

Aperture reduction gearAperture reduction gear

Aperture reduction gear

ApertureAperture

Aperture

reduction gearreduction gear

reduction gear

Aperture baseplate-AAperture baseplate-A

Aperture baseplate-A

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 60 61

Commenti su questo manuale

Nessun commento

Minolta DYNAX 5D Manuale di Servizio Pagina 50

Commenti su questo manuale

Prodotti e manuali riguardandi Fotocamere bridge Minolta DYNAX 5D